Material exploration workbench

Compare materials, then trace the engineering tradeoffs

Select two to four materials for a direct comparison, or follow a use need through live candidates, properties, and process checks. Every view keeps unlike thermal measurements separate.

Material 1Material 2Material 3 (optional)Material 4 (optional)

Comparison controls are preparing.

Interactive highlighting is unavailable. All decision paths and structured visualization data remain readable below.

Interactive map controls are preparing. Every path and structured table is already available.

Decision lane
Easy prototypes
4 live candidates; 1 process gate
Scroll horizontally to inspect every candidate mark.
1. Need
  Start quickly with a lower-burden material.
2. Properties to check
  - Print difficulty
3. Live candidates
4. Verify and process gates
  - Check heat, creep, and impact limits before treating a prototype material as a service material.
  Temperature capability
  Use hotend, bed, and chamber hardware rated for the selected starting range. Confirm component ratings and printer manufacturer limits.
Decision lane
Outdoor
13 live candidates; 1 process gate
Scroll horizontally to inspect every candidate mark.
1. Need
  Select for outdoor and UV exposure.
2. Properties to check
  - Moisture sensitivity
  - Outdoor and UV behavior
3. Live candidates
  More live candidates (5)
4. Verify and process gates
  - Verify pigment, formulation, water ingress, temperature cycling, and exposure duration.
  Drying and dry-storage capability
  Provide active drying and dry storage when the material requires it. Follow exact product drying limits and confirm a dry process path.
Decision lane
Impact and flex
8 live candidates; 1 process gate
Scroll horizontally to inspect every candidate mark.
1. Need
  Select for impact, flex, or repeated movement.
2. Properties to check
  - Flexibility
  - Impact resistance
3. Live candidates
4. Verify and process gates
  - Orientation, strain, wall geometry, and cycle count can dominate the family rating.
  Flexible-material feed path
  Use a constrained feed path suitable for flexible filament. Confirm extrusion stability with the exact hardness and speed.
Decision lane
Chemical exposure
4 live candidates; 1 process gate
Scroll horizontally to inspect every candidate mark.
1. Need
  Select for contact with chemicals.
2. Properties to check
  - Chemical resistance
3. Live candidates
4. Verify and process gates
  - Verify chemical, concentration, temperature, contact time, and stress state.
  Ventilation capability
  Provide the relative ventilation control category required by the process. Read the exact SDS and confirm applicable enclosure and workplace controls.
Decision lane
High heat and sustained load
7 live candidates; 2 process gates
Scroll horizontally to inspect every candidate mark.
1. Need
  Select for elevated temperature and sustained load.
2. Properties to check
  - Creep and sustained load
  - Maximum service temperature
3. Live candidates
4. Verify and process gates
  - Thermal metrics are not equivalent; verify test, load, duration, orientation, and conditioning.
  Enclosure capability
  Provide the enclosure or chamber capability required by the material. Confirm enclosure temperature capability, thermal stability, and printer approval.
  Temperature capability
  Use hotend, bed, and chamber hardware rated for the selected starting range. Confirm component ratings and printer manufacturer limits.
Decision lane
Industrial
4 live candidates; 3 process gates
Scroll horizontally to inspect every candidate mark.
1. Need
  Identify industrial-process material families.
2. Properties to check
  - Enclosure requirement
  - Print difficulty
  - Ventilation category
3. Live candidates
4. Verify and process gates
  - Confirm hotend, bed, chamber, drying, ventilation, and exact-grade process window.
  Drying and dry-storage capability
  Provide active drying and dry storage when the material requires it. Follow exact product drying limits and confirm a dry process path.
  Industrial process hardware
  Use qualified high-temperature hardware and process controls. Confirm hotend, bed, heated chamber, drying, and ventilation capability.
  Ventilation capability
  Provide the relative ventilation control category required by the process. Read the exact SDS and confirm applicable enclosure and workplace controls.
Decision lane
Decorative fills
2 live candidates; 2 process gates
Scroll horizontally to inspect every candidate mark.
1. Need
  Select a decorative filled material.
2. Properties to check
  - Recommended uses
  - Wear-resistant nozzle requirement
  - Wear and abrasion
3. Live candidates
  1. Open material reference
  2. Open material reference
4. Verify and process gates
  - Fillers can be abrasive; the base polymer governs heat and creep. Control finishing dust.
  Wear-resistant nozzle capability
  Use wear-resistant extrusion hardware when the material requires it. Confirm nozzle and feed-path compatibility with the exact filler.
  Ventilation capability
  Provide the relative ventilation control category required by the process. Read the exact SDS and confirm applicable enclosure and workplace controls.
Decision lane
Support materials
2 live candidates; 2 process gates
Scroll horizontally to inspect every candidate mark.
1. Need
  Select a removable support material.
2. Properties to check
  - Recommended uses
  - Moisture sensitivity
3. Live candidates
  1. Open material reference
  2. Open material reference
4. Verify and process gates
  - Match support to the main-material temperature and follow moisture and removal safety guidance.
  Drying and dry-storage capability
  Provide active drying and dry storage when the material requires it. Follow exact product drying limits and confirm a dry process path.
  Soluble-support process
  Control storage, pairing, removal, and disposal for soluble support materials. Verify main-material compatibility and follow solvent or water-handling guidance.

23 records plotted; 0 filtered from the diagram; 0 not plotted.

Practical service interval Conditional — review conditions Selected

Scroll horizontally to inspect the Celsius axis and all interval endpoints.

Ordered practical service controls

Scroll horizontally to inspect every column.

Practical service guidance for every material
Material	State	Value	Unit	Metric or guidance	Method and conditions	Qualification	Evidence scope	Material reference
PLA	Known — Plotted	40–50	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PLA+ / Tough PLA	Known — Plotted	45–55	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PETG	Known — Plotted	60–70	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PCTG	Known — Plotted	70–80	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
ABS	Known — Plotted	75–90	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
ASA	Known — Plotted	80–95	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Product-specific; Family guidance	Open material reference
TPU 95A	Known — Plotted	60–80	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
Nylon / PA6	Known — Plotted	80–100	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PA12 Nylon	Known — Plotted	80–100	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PA-CF	Known — Plotted	100–140	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
Polycarbonate (PC)	Known — Plotted	100–120	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PC-CF	Known — Plotted	110–140	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
Polypropylene (PP)	Known — Plotted	80–100	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PEI / Ultem	Known — Plotted	160–200	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Product-specific; Family guidance	Open material reference
PEEK	Known — Plotted	200–250	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Product-specific; Family guidance	Open material reference
PLA-CF	Known — Plotted	40–50	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
Copper-filled PLA	Known — Plotted	40–50	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
PETG-CF	Known — Plotted	55–65	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Product-specific; Family guidance	Open material reference
Wood-filled PLA	Known — Plotted	40–50	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
HIPS	Known — Plotted	65–80	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Product-specific; Family guidance	Open material reference
PVA / BVOH	Known — Plotted	35–45	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference
CPE	Known — Plotted	55–70	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Product-specific; Family guidance	Open material reference
PPS-CF	Known — Plotted	180–200	°C	Practical service guidance	Review defined method and conditions	Approximate modest-load service guidance; not a guaranteed limit and not interchangeable with a named thermal test.	Representative product; Family guidance	Open material reference

8 decision lanes × 8 process gates = 64 direct checks. 13 apply; 51 are not listed.

Applies — verify this gate Not listed for this lane Selected

Scroll horizontally to inspect all eight process gates.

Complete direct-reference matrix
Decision lane and candidates	Drying and dry-storage capability	Enclosure capability	Flexible-material feed path	Wear-resistant nozzle capability	Industrial process hardware	Soluble-support process	Temperature capability	Ventilation capability
Easy prototypes4 live candidates
Outdoor13 live candidates
Impact and flex8 live candidates
Chemical exposure4 live candidates
High heat and sustained load7 live candidates
Industrial4 live candidates
Decorative fills2 live candidates
Support materials2 live candidates

Process-gate relationships by decision lane

This stacked reading view contains the same 64 direct checks as the matrix.

Easy prototypes
Need: Start quickly with a lower-burden material.
4 live candidates
Drying and dry-storage capability
Not listed for this lane. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Applies — verify this gate. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Not listed for this lane. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
Outdoor
Need: Select for outdoor and UV exposure.
13 live candidates
Drying and dry-storage capability
Applies — verify this gate. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Not listed for this lane. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Not listed for this lane. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
Impact and flex
Need: Select for impact, flex, or repeated movement.
8 live candidates
Drying and dry-storage capability
Not listed for this lane. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Applies — verify this gate. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Not listed for this lane. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Not listed for this lane. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
Chemical exposure
Need: Select for contact with chemicals.
4 live candidates
Drying and dry-storage capability
Not listed for this lane. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Not listed for this lane. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Applies — verify this gate. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
High heat and sustained load
Need: Select for elevated temperature and sustained load.
7 live candidates
Drying and dry-storage capability
Not listed for this lane. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Applies — verify this gate. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Applies — verify this gate. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Not listed for this lane. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
Industrial
Need: Identify industrial-process material families.
4 live candidates
Drying and dry-storage capability
Applies — verify this gate. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Applies — verify this gate. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Not listed for this lane. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Applies — verify this gate. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
Decorative fills
Need: Select a decorative filled material.
2 live candidates
- Copper-filled PLA
- Wood-filled PLA
Drying and dry-storage capability
Not listed for this lane. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Applies — verify this gate. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Not listed for this lane. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Not listed for this lane. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Applies — verify this gate. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.
Support materials
Need: Select a removable support material.
2 live candidates
- HIPS
- PVA / BVOH
Drying and dry-storage capability
Applies — verify this gate. Requirement: Provide active drying and dry storage when the material requires it. Verification: Follow exact product drying limits and confirm a dry process path.
Enclosure capability
Not listed for this lane. Requirement: Provide the enclosure or chamber capability required by the material. Verification: Confirm enclosure temperature capability, thermal stability, and printer approval.
Flexible-material feed path
Not listed for this lane. Requirement: Use a constrained feed path suitable for flexible filament. Verification: Confirm extrusion stability with the exact hardness and speed.
Wear-resistant nozzle capability
Not listed for this lane. Requirement: Use wear-resistant extrusion hardware when the material requires it. Verification: Confirm nozzle and feed-path compatibility with the exact filler.
Industrial process hardware
Not listed for this lane. Requirement: Use qualified high-temperature hardware and process controls. Verification: Confirm hotend, bed, heated chamber, drying, and ventilation capability.
Soluble-support process
Applies — verify this gate. Requirement: Control storage, pairing, removal, and disposal for soluble support materials. Verification: Verify main-material compatibility and follow solvent or water-handling guidance.
Temperature capability
Not listed for this lane. Requirement: Use hotend, bed, and chamber hardware rated for the selected starting range. Verification: Confirm component ratings and printer manufacturer limits.
Ventilation capability
Not listed for this lane. Requirement: Provide the relative ventilation control category required by the process. Verification: Read the exact SDS and confirm applicable enclosure and workplace controls.

23 plotted; 0 filtered from the diagram; 0 not plotted. All 23 records remain in the table.

Material Conditional — review conditions Selected

Scroll horizontally to inspect all category combinations.

Cell spacing indicates category order only. Cell numbers report currently plotted records.

Ordered material controls

Scroll horizontally to inspect every column.

All materials in categorical order, including filtered and unplottable records
Material	Impact resistance	Impact fact state	Flexibility	Flexibility fact state	Print difficulty	Diagram state	Material reference
PLA	Low impact	known	Rigid	known	Easy	Plotted	Open material reference
Copper-filled PLA	Low impact	known	Rigid	known	Moderate	Plotted	Open material reference
Wood-filled PLA	Low impact	known	Rigid	known	Moderate	Plotted	Open material reference
PETG-CF	Moderate impact	known	Rigid	known	Moderate	Plotted	Open material reference
PPS-CF	Moderate impact	known	Rigid	known	Expert	Plotted	Open material reference
PA-CF	High impact	known	Rigid	known	Advanced	Plotted	Open material reference
PC-CF	High impact	known	Rigid	known	Expert	Plotted	Open material reference
PLA-CF	High impact	known	Rigid	known	Easy	Plotted	Open material reference
PEI / Ultem	Very high impact	known	Rigid	known	Expert	Plotted	Open material reference
PEEK	Very high impact	known	Rigid	known	Expert	Plotted	Open material reference
PVA / BVOH	Brittle	known	Semi rigid	known	Advanced	Plotted	Open material reference
PLA+ / Tough PLA	High impact	known	Semi rigid	known	Easy	Plotted	Open material reference
PETG	High impact	known	Semi rigid	known	Easy	Plotted	Open material reference
ABS	High impact	known	Semi rigid	known	Advanced	Plotted	Open material reference
ASA	High impact	known	Semi rigid	known	Advanced	Plotted	Open material reference
HIPS	High impact	known	Semi rigid	known	Advanced	Plotted	Open material reference
CPE	High impact	known	Semi rigid	known	Advanced	Plotted	Open material reference
PCTG	Very high impact	known	Semi rigid	known	Moderate	Plotted	Open material reference
Polycarbonate (PC)	Very high impact	known	Semi rigid	known	Advanced	Plotted	Open material reference
Nylon / PA6	Very high impact	known	Flexible	known	Advanced	Plotted	Open material reference
PA12 Nylon	Very high impact	known	Flexible	known	Advanced	Plotted	Open material reference
TPU 95A	Very high impact	known	Very flexible	known	Moderate	Plotted	Open material reference
Polypropylene (PP)	Very high impact	known	Very flexible	known	Advanced	Plotted	Open material reference

Interactive map controls are preparing. Static decision paths remain available.